Water-oil separators
Treat oily condensate before it goes to drain — compliant disposal without paying to haul away water.
Overview
Water-oil separators
Treat oily condensate before it goes to drain — compliant disposal without paying to haul away water.
OMEGA AIR publishes each series in this range separately — the manufacturer's own description and characteristics for every one are listed below.
From the manufacturer
Product Features
WOSm series
WOSm water oil separators have been developed to separate lubricant oil from condensate generated in compressed air systems. Due to patented technology regular service can be done in 30 seconds without any cleaning. Separation begins in “cyclonic depressurization chamber” and continues in “filter cartridge”. When the “filter cartridge” is fully saturated you just simply unscrew complete cartridge and replace it with new one. All the condensate stays in old cartridge which can also be sealed with plastic cover and disposed according to local directives and laws.
WOS series
WOS water oil separators have been developed to separate lubricant oil from condensate from compressed air systems. WOS water-oil separator can be used in variety of applications. For applications not listed please contact us or your local distributor.
WOS CD series
WOS CD is intended for systems, where amount of generated condensate exceeds capacity of single largest available WOS water oil separator. WOS CD can evenly distribute collected condensate between up to three WOS 35 water oil separators. WOS CD is equipped with flow distributor on the inlet port, up to 8 hose tail connections mounted on elbows for convenient outlet, manual ball valve for cleaning purpose and vent port for safe aeration. Optional wall mounting kit is available. Maximum capacity in regard to free air delivery, when connected to WOS-35 is 120 Nm3/min.
Manufacturer data
Technical Parameters
Characteristics as published by OMEGA AIR for each series in this range.
WOSm series
| operating temp. range | 1,5 to 65 °C |
| inlet connection | ᶲ8 mm |
Applications
- compressed air systems
- suitable for installation inside compressors
- compressed air dryers
- condensate separators
- pressure vessels
WOS series
| operating temp. range | 1,5 to 45 °C |
| inlet connection | ᶲ10 mm |
| standard colour | RAL 7021 |
Applications
- compressed air systems
WOS CD series
| operating temp. range | 1,5 to 65 °C |
| inlet connection sizes | 3/4" to 3" |
| standard colour | RAL 7021 |
Applications
- automotive
- electronics
- food & Beverage
- chemical
- petrochemical
- plastics
- paint
- general industrial application
Source: omega-air.si
Each series above links to its own page on the manufacturer's site. Profiti sizes the equipment for your actual flow, pressure and air-quality class after a site survey.
Not sure which model fits your plant?
Tell us your flow, pressure and air-quality requirement — or let us measure them for you. A site survey costs you nothing.