Cyclone & condensate separators
Spin the bulk water out before it reaches your filters and dryer — the cheap first line of defence after the compressor.
Overview
Cyclone & condensate separators
Spin the bulk water out before it reaches your filters and dryer — the cheap first line of defence after the compressor.
OMEGA AIR publishes each series in this range separately — the manufacturer's own description and characteristics for every one are listed below.
From the manufacturer
Product Features
CS /CS SS series - Welded condensate separators
CS condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the CS cyclone separator it is essential to install automatic or electronic condensate drain. CS cyclone separators are also available in stainless steel version CS-SS.
SFH /SFH SS series - Welded condensate separators
SFH condensate separators are designed for high efficient removal of bulk liquids and large impurities from compressed air systems. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the SFH cyclone separator it is essential to install automatic or electronic condensate drain. SFH cyclone separators are also available in stainless steel version SFH-SS.
SFH HP - High pressure condensate separators
SFH HP welded high pressure condensate separators are designed for high efficient removal of bulk liquids and large impurities from high pressure compressed air systems up to 50 bar. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the SFH HP cyclone separator it is essential to install automatic or electronic condensate drain.
Manufacturer data
Technical Parameters
Characteristics as published by OMEGA AIR for each series in this range.
CS /CS SS series - Welded condensate separators
| operating pressure CS | 16 bar |
| operating pressure CS SS | 13 bar |
| volume flow rate | 840 to 14280 Nm³/h |
| connections | DN65 to DN300 |
| operating temp. range | 1,5 to 65°C |
| standard colour CS | RAL 9005 |
| material CS series | carbon steel |
| material CS SS series | stainless steel 1.4404 |
Applications
- automotive
- electronics
- food and beverage
- chemical
- petrochemical
- plastics
- paint
- general industrial applications
SFH /SFH SS series - Welded condensate separators
| operating pressure SFH | 16 bar |
| operating pressure SFH SS | 13 bar |
| volume flow rate | 1760 to 12550 Nm³/h |
| connections | DN80 to DN350 |
| operating temp. range | 1,5 to 65°C |
| standard colour SFH | RAL 9005 |
| material SFH series | carbon steel |
| material SFH SS series | stainless steel 1.4404 |
Applications
- automotive
- electronics
- food and beverage
- chemical
- petrochemical
- plastics
- paint
- general industrial applications
SFH HP - High pressure condensate separators
| operating pressure | 50 bar |
| volume flow rate | 1760 to 12550 Nm³/h |
| connections | DN80 to DN350 |
| operating temp. range | 1,5 to 65°C |
| standard colour | RAL 9005 |
| material | carbon steel |
Applications
- automotive
- electronics
- food and beverage
- chemical
- petrochemical
- plastics
- paint
- general industrial applications
Source: omega-air.si
Each series above links to its own page on the manufacturer's site. Profiti sizes the equipment for your actual flow, pressure and air-quality class after a site survey.
Not sure which model fits your plant?
Tell us your flow, pressure and air-quality requirement — or let us measure them for you. A site survey costs you nothing.