Activated-carbon towers
TAC series removes oil vapour and odour — the step that takes air to technically oil-free for food, beverage and pharma contact.
Overview
Activated-carbon towers
TAC series removes oil vapour and odour — the step that takes air to technically oil-free for food, beverage and pharma contact.
OMEGA AIR publishes each series in this range separately — the manufacturer's own description and characteristics for every one are listed below.
From the manufacturer
Product Features
Activated carbon tower - TAC series
TAC activated carbon towers have been developed for separating oil vapours from compressed air (dry type separation). TAC series is made from high quality carbon steel. Flow distributors ensure uniform distribution of air flow through activated carbon bed. Oil vapours as well as some other hydrocarbons are separated due to adsorption process. Super fine coalescing filter is required upstream TAC and 1μm dust filter is recommended downstream to intercept activated carbon dust. Stainless steel version available on request. High pressure version available on request.
High pressure activated carbon towers - TAC HP series
High pressure activated carbon towers TAC HP have been developed for separating oil vapours from compressed air (dry type separation). TAC HP series is made from high quality carbon steel. Flow distributors ensure uniform distribution of air flow through activated carbon bed. Oil vapours as well as some other hydrocarbons are separated due to adsorption process. Super fine coalescing filter is required ustream TAC HP and 1μm dust filter is recommended downstream to intercept activated carbon dust.
Manufacturer data
Technical Parameters
Characteristics as published by OMEGA AIR for each series in this range.
Activated carbon tower - TAC series
| operating presure | 16 bar |
| inlet air temperature range | 1,5 to 50 °C |
| connections | 3/8 to DN125 |
| flow rate | 6 to 6500 Nm³/h |
| standard colour | RAL 7021 |
Applications
- automotive
- electronics
- food & beverage
- chemical
- petrochemical
- plastics
- paint
- general industrial application
High pressure activated carbon towers - TAC HP series
| operating presure | 50 / 100 / 250 / 420 bar |
| inlet air temperature range | 1,5 to 45 °C |
| connections | 3/8 to 1/2" |
| flow rate | 50 to 1600 Nm3/h |
| standard colour | RAL 9005 |
Applications
- automotive
- electronics
- food & beverage
- chemical
- petrochemical
- plastics
- paint
- general industrial application
Source: omega-air.si
Each series above links to its own page on the manufacturer's site. Profiti sizes the equipment for your actual flow, pressure and air-quality class after a site survey.
Not sure which model fits your plant?
Tell us your flow, pressure and air-quality requirement — or let us measure them for you. A site survey costs you nothing.